Ridgewaycynic2013 Posted January 31 Share Posted January 31 Do NOT  put the squeeze bottle of chipotle mayo in the microwave just to heat it up a bit to induce flow.  Stuff gets everywhere. 🤔🤨  At least it had the decency to wait until I retrieved it and opened it. 1 Quote Link to comment Share on other sites More sharing options...
The Jokeman Posted January 31 Share Posted January 31 On a complete opposite note this weekend I learned not to freeze almond milk, as after it defrosts it ends up separating and get water on the top and bunch of white at the bottom. Quote Link to comment Share on other sites More sharing options...
Royale with Cheese Posted January 31 Share Posted January 31 I need a new saw so I'm getting a Dewalt 10 inch miter saw.  I'm building a play ramp for my dogs and my Skil saw isn't doing the job. It's a cheaper one and I don't have a steady enough hand to cut it straight...I need better equipment.  Quote Link to comment Share on other sites More sharing options...
f0neguy Posted January 31 Share Posted January 31 If you’re looking at a 10 inch mitre saw, consider a 12 inch.  Sooner or later you’ll be thankful for the bigger blade. 3 Quote Link to comment Share on other sites More sharing options...
Albany,n.y. Posted January 31 Share Posted January 31 I once microwaved an egg sunny side up. When I put a fork on it & broke the yolk, the thing exploded. Egg on the kitchen ceiling & my ears were ringing from the explosion.  2 Quote Link to comment Share on other sites More sharing options...
WhoTom Posted January 31 Share Posted January 31 (edited) 7 minutes ago, Albany,n.y. said: I once microwaved an egg sunny side up. When I put a fork on it & broke the yolk, the thing exploded. Egg on the kitchen ceiling & my ears were ringing from the explosion.   I know someone who tried "hard boiling" eggs in the microwave for Easter. I could almost hear the voice of Peppermint Pattie yelling, "Marcie!!"     Edited January 31 by WhoTom Quote Link to comment Share on other sites More sharing options...
teef Posted January 31 Share Posted January 31 2 hours ago, Royale with Cheese said: I need a new saw so I'm getting a Dewalt 10 inch miter saw.  I'm building a play ramp for my dogs and my Skil saw isn't doing the job. It's a cheaper one and I don't have a steady enough hand to cut it straight...I need better equipment.  there's a lot of dog chatter from you today. did you get new dogs? Quote Link to comment Share on other sites More sharing options...
Miyagi-Do Karate Posted January 31 Share Posted January 31 This thread made me think— where is @Canadian Bills Fan at? Quote Link to comment Share on other sites More sharing options...
Canadian Bills Fan Posted January 31 Share Posted January 31 57 minutes ago, Miyagi-Do Karate said: This thread made me think— where is @Canadian Bills Fan at?   2 Quote Link to comment Share on other sites More sharing options...
Royale with Cheese Posted January 31 Share Posted January 31 3 hours ago, f0neguy said: If you’re looking at a 10 inch mitre saw, consider a 12 inch.  Sooner or later you’ll be thankful for the bigger blade.  My next project is rebuilding my front porch. Will the 10 inch blade be able to cut a 4x4 easy? 2 hours ago, teef said: there's a lot of dog chatter from you today. did you get new dogs?  I got a new kitten named DaQuan. He's cool.  My older dog partially tore he ACL so the vet told me I need to keep strengthening her legs to prevent this happening again. She's a thick pit.  Its the same ramp at the dog park she loves. She will run up and down it all day. Quote Link to comment Share on other sites More sharing options...
teef Posted January 31 Share Posted January 31 4 minutes ago, Royale with Cheese said:  My next project is rebuilding my front porch. Will the 10 inch blade be able to cut a 4x4 easy?  I got a new kitten named DaQuan. He's cool.  My older dog partially tore he ACL so the vet told me I need to keep strengthening her legs to prevent this happening again. She's a thick pit.  Its the same ramp at the dog park she loves. She will run up and down it all day. the acl issue is such a pain for larger dogs. my dog never has really had any medical issues except for the acl. he tore on back leg 4-5 years ago. at that time they said they seem me back in a couple of years for the other leg. sure enough, two years later while my dog was running towards me when i got home, i watched him tear the other. the surgeries went well and healed perfectly, but i think i was 9-10k deep after that. my wife was pissy about it, and i let he know that i'd pay for the surgery for that dog before i paid for hers. 1 Quote Link to comment Share on other sites More sharing options...
f0neguy Posted January 31 Share Posted January 31 Concerning capacity of a 10 inch miter saw..  I wouldn’t recommend cutting a 4x4 with a 10 inch saw.  Especially if you need an angled cut (30 or 45 degrees).  Cutting 4x4’s or 2x8’s you’ll want a 12 inch blade. 1 Quote Link to comment Share on other sites More sharing options...
Nextmanup Posted January 31 Share Posted January 31 6 hours ago, Royale with Cheese said: I need a new saw so I'm getting a Dewalt 10 inch miter saw.  I'm building a play ramp for my dogs and my Skil saw isn't doing the job. It's a cheaper one and I don't have a steady enough hand to cut it straight...I need better equipment.   4 hours ago, f0neguy said: If you’re looking at a 10 inch mitre saw, consider a 12 inch.  Sooner or later you’ll be thankful for the bigger blade. Bigger costs more, but 10" is too damned small to be of much use.  I'd go even bigger than 12 if you can afford it.   1 Quote Link to comment Share on other sites More sharing options...
Miyagi-Do Karate Posted January 31 Share Posted January 31 2 hours ago, Canadian Bills Fan said:   Haha. you’ve turned into a lurker only?! Quote Link to comment Share on other sites More sharing options...
Royale with Cheese Posted January 31 Share Posted January 31 You guys have convinced me to upgrade sizes. Quote Link to comment Share on other sites More sharing options...
teef Posted February 1 Share Posted February 1 14 hours ago, Royale with Cheese said: You guys have convinced me to upgrade sizes. as my best friend explained to me long ago, you always spend a little more on things like tools and appliances. you'll be more disappointed that you didn't rather than disappointed that you did. 1 Quote Link to comment Share on other sites More sharing options...
Royale with Cheese Posted February 1 Share Posted February 1 16 hours ago, teef said: the acl issue is such a pain for larger dogs. my dog never has really had any medical issues except for the acl. he tore on back leg 4-5 years ago. at that time they said they seem me back in a couple of years for the other leg. sure enough, two years later while my dog was running towards me when i got home, i watched him tear the other. the surgeries went well and healed perfectly, but i think i was 9-10k deep after that. my wife was pissy about it, and i let he know that i'd pay for the surgery for that dog before i paid for hers.  Mine is only 40 lbs but she's stocky. She is like Mike Tolbert but doesn't have the leg strength. I even built her an indoor dog ramp for the couch.  I am going to add wood plates at the bottom with a paw print etched into them....ahhhh!  Dogs need their ACL. People don't....like John Elway. Are you married to a replica of John Elway? Quote Link to comment Share on other sites More sharing options...
Royale with Cheese Posted February 1 Share Posted February 1 (edited) 19 minutes ago, teef said: as my best friend explained to me long ago, you always spend a little more on things like tools and appliances. you'll be more disappointed that you didn't rather than disappointed that you did.  I have 3 big oak trees in my backyard that sheds large branches a lot. I thought a cheap little Craftsman chainsaw would be at least strong enough to go through a tree branch as thick as a baseball bat. Nope, it doesn't cut it at all. Like the chain won't power through a branch so it really has no use unless I'm cutting cardboard. I wasted like $80.  But also what I have learned is time. Spend more for a machine/equipment/device that will do it right and faster.   Edited February 1 by Royale with Cheese Quote Link to comment Share on other sites More sharing options...
ExiledInIllinois Posted February 3 Share Posted February 3 On 2/1/2024 at 8:15 AM, Royale with Cheese said:  I have 3 big oak trees in my backyard that sheds large branches a lot. I thought a cheap little Craftsman chainsaw would be at least strong enough to go through a tree branch as thick as a baseball bat. Nope, it doesn't cut it at all. Like the chain won't power through a branch so it really has no use unless I'm cutting cardboard. I wasted like $80.  But also what I have learned is time. Spend more for a machine/equipment/device that will do it right and faster.   FWIW... The Dewalt cordless chainsaw really cuts well. I was skeptical but the 60vMax keeps up with medium duty fuel powered performance machines... No blasted fuel/mix small engine maintenance... Storage is a breeze. I am charging my phone with one of the batteries right now as I type this. Quote Link to comment Share on other sites More sharing options...
ExiledInIllinois Posted February 4 Share Posted February 4 TiL (okay kinda already knew)... The marvel of the disposable diaper. Wonder of polymer science.  https://en.m.wikipedia.org/wiki/Diaper     Watch the video under: "Development"    Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.